Troubleshooting Tips Before Calling Your Pool Pump Repair Technician

When you notice that your pool pump is not working properly, your first knee jerk reaction may be to contact the pool pump repair technician. The problem with this is, that you could end up spending money and time on a problem that you could have easily fixed with some troubleshooting. Here are some troubleshooting tips to do before you call your pool pump repair technician and to ensure that when you do call it is for an issue beyond your ability to fix.

Check the Seals and Rings

The first thing to do when you notice your pool pump is not working is check the seals and rings. One of the reasons it may not be working properly is due to a leak or crack in the seals or washers. If you do see a crack, the ring needs to be replaced and can be done with a quick repair kit from hardware and home improvement stores. If you do not find a break or crack in the seals and rings, and you are noticing a leak from the pump, then you may need to contact your pool technician as it may be a problem with the motor itself.

Humming Noise Troubleshooting

If you hear a humming noise coming from your pool pump the pump itself may be blocked. You may think that you already checked, but keep in mind that leaves are not the only things that can block a pool pump. Small pieces of debris like rocks and pebbles can block the pump. Also, unfortunately, small animals and bugs can block the pump as well. Also, some items that can block the pump may be caught in the drainage area of the pump or in the filter of the pump itself. Make sure that you check these areas, and remove the filter to insure that nothing is caught behind the filter itself and blocking the pump.

Check the Pump Lid

One common issue that you may come across is hearing the pump sucking in a lot of air and causing issues with allowing water to fill the pump basket and the pump to work. The first thing you should do if you notice that your pump is doing this is to check the pump lid. The lid itself may not be sitting properly. If it is not, due to debris or another issue, the lid will not cause a suction and it will cause the pump to suck in air and not water. Clear any debris and re-sit the pump lid.

These are three basic troubleshooting tips to help you clear problems with your pool pump before you call in for pool pump repair. Keep in mind, most pool technicians will walk you through some troubleshooting and they will do a consultation before starting any major pump repairs.